Bersagliere1940
New Member
Hello everyone, recently a friend of mine is looking for a folgore impression, but he cant figure out how they were does anyone has a picture of those (are they similar to german ones?). Also does Andrea Roccon make them?
Thx a lot, i hope there someone can tell him where to find the appropriate folgore webbing for the 91/38 whit granadesHere is a picture of his M41 calzature paracadutisti. The soles are the wrong style (but correctly rubber) because he can't get the correct CRODA soles. Not made anymore.
View attachment 628
ThanksUnfortunately the regulation (Circolare N.801 - Equipaggimento, 29 ottobre 1941) doesn't give the measurements of the boots. It does specify 24 grommets/eyelets for the lacing (12 on a side). Note the larger spacing of the upper four eyelets in the picture above. My US Army boots has eight evenly spaced eyelets. From the ground to the top of the boots is only 10.5 inches. From the welt to the top of the boot is only 9 inches. I believe 10-12 inches is in the ballpark, but I assume there is some sort of ratio between boot size and shaft height. I would contact Neal who I recommended above and ask how tall his boots are from Andrea.
Pista! Jeff